TD42S3

Thermodynamic Steam Trap for Low Ambient Temperature Service

TD42S3

The TD42S3 is a thermodynamic steam trap with forged steel body and socket weld ends, specifically designed for use in low ambient temperatures down to -48°C.
A full range of lower capacity traps (½” – 1″) designated TD42S2LC are available for applications such as mains drainage or tracing.

Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 97 /23 / EC.

Certification
This product is available with certification to EN 10204 3.1.
Note: All certification / inspection requirements must be stated at the time of order placement.

½”LC, ¾”LC, 1″LC, ½”, ¾” and 1″ socket weld ends to ASME B 16.11 Schedule 80 / BS 3799 Class 3000 lb.

Insulating cover: To prevent the trap being unduly influenced by excessive heat loss such as when subjected to low outside temperatures, wind, rain etc.
Integral blowdown valve: A BDV1 or BDV2 can be fitted to the strainer cap (manufactured in 316L), alternatively the strainer cap can be drilled, tapped and plugged ” BSP or NPT.

TD42S3 Thermodynamic Steam Trap

No. Part Material
1 Body Steel ASTM A350 LF2 Class 1
2 Cap Stainless steel AISI 316L
3 Disc Stainless steel BS 1449 420 S45
4 Strainer screen Stainless steel AISI 316L
5 Strainer cap Stainless steel AISI 316L
6 Strainer cap gasket Stainless steel BS 1449 304 S16
*7 Insulating cover (optional extra) Aluminium

Note: Item 7 is shown on the spares illustration overleaf.

TD42S3 Thermodynamic Steam Trap.jpg

©2022 PT. TOTALITAS TEKNIK INDONESIA. All Rights Reserved.
Chat now!
Scan the code
Hi Totalitas Teknik Indonesia I need more info..