TD42S2

Thermodynamic Steam Traps

TD42S2 Thermodynamic Steam Traps

The TD42S2 is a thermodynamic steam trap with forged steel body and socket weld ends.
A full range of lower capacity traps (½” – 1″) designated TD42S2LC are available for applications such as mains drainage or tracing.

Please note:
For low temperature applications down to -46 °C use the TD42S3 (ASTM A350 LF2) – See TI-P068-23 for further information.

Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU.

Certification
This product is available with certification to EN 10204 3.1.
Note: All certification/inspection requirements must be stated at the time of order placement.

½”LC, ¾”LC, 1″LC, ½”, ¾” and 1″ socket weld ends to:
ASME (ANSI) B 16.11 Schedule 80 / BS 3799 Class 3000 lb.

Insulating cover
To prevent the trap being unduly influenced by excessive heat loss such as when subjected to low outside temperatures, wind, rain etc
TD42S2 Thermodynamic Steam Traps

TD42S2 Thermodynamic Steam Traps

No. Part Material
1 Body Steel ASTM A350 LF2 Class 1
2 Cap Stainless steel AISI 316L
3 Disc Stainless steel BS 1449 420 S45
4 Strainer screen Stainless steel AISI 316L
5 Strainer cap Stainless steel AISI 316L
6 Strainer cap gasket Stainless steel BS 1449 304 S16
*7 Insulating cover (optional extra) Aluminium

Note: Item 7 is shown on the spares illustration overleaf.

When sizing the TD42S2 it is important to ensure that the correct model is selected.
This will ensure the required operation and maximum life.
For mains drainage and tracing applications the LC version should be selected irrespective of pipe size.
TD42S2 Thermodynamic Steam Traps

©2022 PT. TOTALITAS TEKNIK INDONESIA. All Rights Reserved.
Chat now!
Scan the code
Hi Totalitas Teknik Indonesia I need more info..