Description
The BPS32 and BPS32Y are stainless steel maintainable balanced pressure thermostatic steam traps with straight connections.
The BPS32 has an integral flat strainer screen and the BPS32Y
an integral cylindrical Y-type strainer. All pressure bearing components are produced by TÜV approved suppliers in accordance with
AD-Merkblatt WO/TRD100. Both traps are unaffected by waterhammer and are available as follows:-
Standard units BPS32 and BPS32Y having ‘STD’ fill capsule
Also available BPS32CV and BPS32YCV having ‘STD’ fill capsule and check valve.
Note: When placing an order always state capsule fill.
Capsule fill and operation:
Standard capsule – Is marked with ‘STD’ for operation at approximately 12 °C below steam saturation temperature.
Optionally – The capsule can be supplied for sub-cooled ‘SUB’ operation at approximately 24 °C below steam saturation temperature
or near-to-steam ‘NTS’ operation at approximately 6 °C below steam temperature.
Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 2014/68/EU.
Certification
This product is available with certification to EN 10204 3.1.
Note: All certification/inspection requirements must be stated at the time of order placement.
Sizes and pipe connections
½”, ¾”, and 1″ screwed BSP T Rp (ISO 7-1) or NPT.
½”, ¾”, and 1″ socket weld ends to BS 3799.
½”, ¾”, and 1″ butt weld ends to EN 12 627.
DN15, DN20 and DN25 standard flange to EN 1092 PN40,
ASME B 16.5 Class 150 and 300, JIS/KS 10K and JIS/KS 20K.
Materials
No. | Part | Material | |
1 | Cover | Austenitic stainless steel | EN 10222-5 1.4571 or ASTM A182 F316 Ti |
2 | Capsule | Stainless steel | |
3 | Valve seat | Stainless steel | BS 970 431 S29 |
5 | Strainer screen | Stainless steel | AISI 304 |
7 | Cover gasket | Stainless steel reinforced exfoliated graphite | |
8 | Body / flanges | Austenitic stainless steel | EN 10222-5 1.4571 or ASTM A182 F316 Ti |
9 | Cover bolts | Stainless steel (M10 x 30) A2-70 | |
10 | Strainer cap | Austenitic stainless steel | DIN 17440 (W/S 1.4404) 316L |
11 | Strainer cap gasket | Stainless steel | BS 1449 304 S16 |
17 | Spring | Stainless steel | |
18 | Spacer plate | Stainless steel |
Capacities
BPS32 and BPS32Y
Stainless Steel Balanced Pressure Thermostatic Steam Traps
PHONE: 0812-3340-4116WHATSAPP: 0812-3340-4116
Spirax Sarco – steam product solution
- FTC62 and FTS62 high pressure float traps (DN15 – DN25)
- FT14 Ball Float Steam Trap (Flanged)
- FT14 Ball Float Steam Trap (Screwed)
- BT6-B and BT6-B Food+ Sanitary Balanced Pressure Thermostatic Steam Trap
- BPS32 and BPS32Y Stainless Steel Balanced Pressure Thermostatic Steam Traps
- SMC32 and SMC32Y Carbon Steel Bimetallic Steam Traps
- ISMC32 Carbon Steel Bimetallic Steam Trap with Integral Spiratec Sensor
- SM45 Bimetallic Steam Trap