TD42

Thermodynamic Steam Trap

Description

The TD42 is a maintainable thermodynamic steam trap.
The TD42LC is specifically designed for relatively small condensate load and is, therefore, ideal for mains drainage applications.

Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC.

Certification
This product is available with a manufacturer’s Typical Test Report.
Note: All certification /inspection requirements must be stated at the time of order placement.

Sizes and pipe connections

^3/8″, ½” LC – Low Capacity, ½” and ¾” screwed BSP or NPT.

Optional extras

Insulating cover: to prevent the trap being unduly influenced by excessive heat loss such as when subjected to low outside temperatures, wind, rain, etc.

Integral blowdown valve: a BDV1 or BDV2 can be fitted to the strainer cap, alternatively the strainer cap can be drilled, tapped and plugged ^3/8” BSP or NPT.

Materials

TD42 Thermodynamic Steam Trap

No.	Part	Material
1	Body	Stainless steel	ASTM A743 Gr. CA 40
2	Cap	Stainless steel	AISI 416
3	Disc	Stainless steel	BS 1449 420 S45
4	Strainer screen	Stainless steel	BS 1449 304 S16
5	Strainer cap	Stainless steel	AISI 416
6	Strainer cap gasket	Stainless steel	BS 1449 304 S16
7	Insulating cover (optional extra)	Aluminium