Description
The BTD52L is manufactured from 316L stainless steel specifically for mains drainage applications in clean steam systems.
BTD52L Food+
Designed, manufactured and approved for Steam and Condensate applications.
This product complies with EC1935:2004 Food Contact Materials. It also complies with regulation EC2023:2006 on good manufacturing practice for materials and articles intended to come into contact with food.
A list of the materials that could come directly or indirectly into contact with foodstuffs can be found in the Declaration of Compliance available for this product.
Standards
These products fully comply with the requirements of the EU
Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations.
Certification
- This product is available with certification to EN 10204 3.1.
Note: All certification/inspection requirements must be stated at the time of order placement
- The BTD52L Food+ is available with an EC1935:2004 Declaration of Compliance.
Note: All certification/inspection requirements must be stated at the time of order placement
BTD52L Food+ ½” range available with a food contact regulation Declaration of Compliance
Designed, manufactured and approved for Steam and Condensate applications, the BTD52L Food+ product complies with:
- (EC)1935:2004 Materials and Articles Intended to come into Contact with Food
- (EC)2023:2006 Good Manufacturing Practice for Materials and Articles Intended to come into Contact with Food
- (EU)10/2011 Plastic Materials and Articles Intended to come into Contact with Food
- FDA Code of Federal Regulations – title 21 – Food and Drugs
Optional extras
An insulating cover is available at extra cost to prevent the trap being unduly influenced by excessive heat loss when subjected to low ambient temperature, wind and rain etc.
Sizes and pipe connections
BTD52L Food+ is available with ½” Sanitary Clamps and ½” BSP.
¼”, 3/8“, ½” screwed BSP or NPT.
½” O/D x 16 swg (0.065″) wall thickness tube end.
DN 11850 (Series 1) tube ends
12 mm O/D x 1.0 mm wall thickness (DN10)
18 mm O/D x 1.0 mm wall thickness (DN15)
ISO 1127 (Series 1) tube ends
17.2 mm O/D x 1.6 mm wall thickness (DN10)
21.3 mm O/D x 1.6 mm wall thickness (DN15)
½” Sanitary clamp compatible connections (DN15)
Materials
No. | Part | Material | |
1 | Body | Austenitic stainless steel | AISI 316L |
2 | Cap | Austenitic stainless steel | AISI 316L |
3 | Disc | Austenitic stainless steel | AISI 316L |
4** | Insulating cover (optional extra) |
Aluminium |
** Note: For clarity item 4 is shown page 5.
Note: The BTD52L Food+ version comes with a Laser Marked cap, not a nameplate.
Capacities
BTD52L and BTD52L Food+
Thermodynamic Steam Trap
PHONE: 0812-3340-4116
WHATSAPP: 0812-3340-4116
- BTD52L and BTD52L Food+ Thermodynamic Steam Trap Spirax Sarco
- ITD32 Thermodynamic Steam Trap with Integral Spiratec Sensor Spirax Sarco
- TD120M High Pressure Thermodynamic Steam Trap with Replaceable Seat Spirax Sarco
- TD259 and TD259A Thermodynamic Steam Traps Spirax Sarco
- TD32F Flanged Thermodynamic Steam Trap Spirax Sarco
- TD42 Thermodynamic Steam Trap Spirax Sarco
- TD42A Thermodynamic Steam Trap Spirax Sarco
- TD42L and TD42H Thermodynamic Steam Traps Spirax Sarco
- TD42S2 Thermodynamic Steam Traps Spirax Sarco
- TD42S3 Thermodynamic Steam Trap for Low Ambient Temperature Service