ARI-TEMPTROL® 775 LCG

Thermal-opening valve – straight through with flanges without cooling spacer (max. 130°C) – without balancing bellow

Description

eClass-No.:	37012290
Application:	Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.
Medium:	Fluids, air and steam

Features

• Self-operating (no auxilary power required)
• Reliable, low maintenance operation
• Over-temperature safety device
• Valves pressure balanced with stainless steel bellows
• 3 thermal controller sizes for optimal selection of proportional range
• Thermal sensors with different time constants
• Exact and easy adjustment
• Setting range is adjustable
• Sensor pocket
• Manual control device

Technical data

Thermal-opening valve – straight through with flanges

Fig. …775 max. 150°C (> 150°C on request)

Figure	Nominal pressure	Material	Nominal diameter
12.775	PN16	EN-JL1040	DN15-100
22.775	PN16	EN-JS1049	DN15-100
23.775	PN25	EN-JS1049	DN15-100
35.775	PN40	1.0619+N	DN15-100
55.775	PN40	1.4408	DN15-100

Construction LC without balanced bellow

Figure	Nominal pressure	Material	Nominal diameter
12.775….1..1 PN16	EN-JL1040	DN15-50

Fig. 12.775….1..1 max. 130°C (> 130°C on request)

100

Face-to-face dimension FTF series 1 according to DIN EN 558 Standard-flange dimensions refer to page 15.
L	(mm)	130	150	160	180	200	230	290	310	350

Dimensions
Fig. 775	H	(mm)	195	195	200	225	245	280	300	365	385
Fig. 775….1..1 (LC)	H	(mm)	125	125	130	155	160	160	—	—	—

Weights
Fig. 775	(kg)	5,4	6,8	9,1	11,9	17	19,5	30	37	385
Fig. 775….1..1 (LC)	(kg)	4,5	6	8	10,5	15	17	—	—	—

Kvs-value
Standard	Kvs-value	(m³/h)	4,0	6,3	10,0	16,0	22,0	32,0	50,0	70,0	80,0
Standard	Travel	(mm)	7,5	7,5	8	9,5	9,5	11,5	14	15	15
Reduced	Kvs-value	(m³/h)	1,0	—	—	—	—	—	—	—	—
Reduced	Travel	(mm)	5	—	—	—	—	—	—	—	—

Leakage rate

IV acc. to DIN EN 1349 or DIN EN 60534-4 (≤ 0,01% from the nominal flow)

Max. differential pressure drop Δp
Fig. 775	A AB Straight through	(bar)	12	4	4	4	4	4	4	4	4
Fig. 775….1..1 (LC)	A AB Straight through	(bar)	3	3	2,5	1,5	1	0,5	—	—	—
Pressure balancing of the actuator needed at P1 > max. differential pressure drop Δp (out of table). For pressure balancing use manual control device (Type 9900390011).

Parts
Pos.	Sp.p.	Description	Fig. 12.775	Fig. 22./23.775	Fig. 35.775	Fig. 55.775
1		Body	EN-JL1040, EN-GJL-250	EN-JS1049, EN-GJS-400-18U-LT	GP240GH+N, 1.0619+N	GX5CrNiMo19-11-2, 1.4408
1.2		Seat	X20Cr13+QT, 1.4021+QT			X6CrNiMoTi17-12-2, 1.4571
3		Cheese head screw	A2-70
4	x	Plug guiding	X20Cr13+QT, 1.4021+QT			X6CrNiTi18-10, 1.4541
5		Giude bushing	X20Cr13+QT, 1.4021+QT			X6CrNiTi18-10, 1.4541
7	x	Gasket	Graphite
11		Bonnet	EN-JS1049, EN-GJS-400-18U-LT			GX5CrNiMo19-11-2, 1.4408
14	x	Spindle unit	X20Cr13+QT, 1.4021+QT / X6CrNiTi18-10, 1.4541			X6CrNiTi18-10, 1.4541
19		Bearing cover	X6CrNiTi18-10, 1.4541
21		Hexagon nut	A2-70
23		Hexagon nut	C35E, 1.1181 -A2B			A4-70
24		Hexagon screw	5.6-A2B			A4-70
25		Flange	S235JR, 1.0037			X6CrNiTi18-10, 1.4541
26	x	Gasket	Graphite (with CrNi-expanded metal insert)
28		Cooling spacer	EN-JS1049, EN-GJS-400-18U-LT			X6CrNiTi18-10, 1.4541
37	x	Compression spring	X12CrNi17-7, 1.4310
55	x	Balanced bellow	X6CrNiTi18-10, 1.4541
	└ Spare parts

Information / restriction of technical rules need to be observed!

Operating and installation instructions can be downloaded at www.ari-armaturen.com. ARI-Valves of EN-JL1040 are not allowed to be operated in systems acc. to TRD 110.

A production permission acc. to TRB 801 No. 45 is available (acc. to TRB 801 No. 45 EN-JL1040 is not allowed.) The engineer, designing a system or a plant, is responsible for the selection of the correct valve.

Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).