Description
| eClass-No.: | 37010201 |
| Application: | Industry, powerstations, flue gas purification plant, processing technology, gas supply, vapour facilities, recycling facilities, vacuum facilities, hot water, heating technology, district heating, thermal oil applications, general plant manufacturing, etc. |
| Medium: | Steam, gases, hot water, thermal oil, process water, vacuum facilities, ammonia etc. |
Features
• Bellows seal out of media flow path
• Double wall bellows seal as standard
• DN 15-300: Plug with marginal seat
• Lubricating nipple as locking device as standard
• Stem with bellows seal
• Secondary sealing: gland packing
• Position indicator as standard
• Non-rising handwheel
• Non-rotation lock for each nominal diameter
• External stem thread
• Stem with roll hardened thread
• Favourable zeta-values also for small nominal diameters
• Gland packing sleeve with pivot mounted bolts
ARI-FABA® LA 044
Stop valve – straight through with long bellow and flanges – long construction (Cast steel)
| Figure-No. | Nominal pressure | Material | Nominal diameter |
| 34.044 | PN25 | 1.0619+N | DN15-400 |
| 35.044 | PN40 | 1.0619+N | DN15-400 |
| DN500 on request | |||
| Test: | • EN ISO 15848-1 / TA – Luft TÜV-Test-No. TA 07 2016 C04 |
| Plug design: | • DN15-300: Plug with marginal seat standard |
| Parts | |||
| Pos. | Sp.p. | Description | Fig. 34.044 / 35.044 |
| 1 | Body | GP240GH+N, 1.0619+N | |
| 1.2 | Seat ring / Seat | ≤DN50: X20Cr13+QT, 1.4021+QT / >DN50: G19 9 NbSi, 1.4551 | |
| 2 | Bellows housing | GP240GH+N, 1.0619+N | |
| 3 | x | Plug | X20Cr13+QT, 1.4021+QT (hardened) |
| 4 4.1 4.2 |
x |
Stem unit | |
| Bellows seal | X6CrNiMoTi17 12 2, 1.4571 | ||
| Stem | X5CrNi18-10, 1.4301 | ||
| 5 | Handwheel | ≤DN125: St (epoxy-coating) / >DN125: EN-JL1040, EN-GJL-250 (epoxy-coating) | |
| 6 | x | Packing ring | Pure graphite |
| 7 | Stud | 25CrMo4, 1.7218 | |
| 8 | Hexagon nut | C35E, 1.1181 | |
| 9 | x | Gasket | Pure graphite (CrNi laminated with graphite) |
| 15 | x | Insert nuts | 11SMn30+C, 1.0715+C |
| └ Spare parts | |||
| DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 500 |
| Face-to-face dimension FTF Series 1 acc. to DIN EN 558 | ||||||||||||||||||
| L | (mm) | 130 | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | 730 | 850 | 980 | 1100 | a.A. |
| Dimensions Standard-flange dimensions refer to page 6 | ||||||||||||||||||
| H4 | (mm) | 325 | 325 | 335 | 335 | 430 | 435 | 450 | 460 | 620 | 645 | 680 | 830 | 915 | 955 | 1255 | 1270 | |
| ØC | (mm) | 175 | 175 | 175 | 175 | 225 | 225 | 225 | 225 | 300 | 300 | 400 | 520 | 520 | 520 | 640 | 640 | |
| Travel | (mm) | 7 | 7 | 10 | 10 | 17 | 17 | 20 | 20 | 36 | 40 | 40 | 50 | 65 | 75 | 90 | 100 | |
| Kvs-value | (m3/h) | 4,2 | 7,4 | 12 | 19 | 31 | 45 | 76 | 107 | 173 | 288 | 410 | 725 | 1145 | 1635 | 2220 | 3180 | |
| Zeta-value | — | 4,6 | 4,7 | 4,3 | 4,6 | 4,3 | 4,9 | 4,9 | 5,7 | 5,3 | 4,7 | 4,8 | 4,9 | 4,8 | 4,8 | 4,9 | 4 | |
| Zeta-value … range of tolerance for Kvs-values acc. to VDI/VDE 2173 | ||||||||||||||||||
| Weights | ||||||||||||||||||
| 34./35.044 | (kg) | 6,1 | 7 | 8 | 10 | 13,3 | 16 | 24 | 28 | 42 | 65 | 90 | 170 | 300 | 360 | 410 | 600 | a.A. |
Information / restriction of technical rules need to be observed!
Operating and installation instructions can be downloaded at www.ari-armaturen.com. A production allowance acc. to TRB 801 No. 45 exists
The engineer, designing a system or a plant, is responsible for the selection of the correct valve.
Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list)
ARI-FABA® LA 067
Stop valve – straight through with long bellow and butt weld ends – long construction (Forged steel)
| Figure-No. | Nominal pressure | Material | Nominal diameter |
| 45.067 | PN40 | 1.0460 | DN15-50 |
| Butt weld ends according to DIN EN 12627 – 4 (refer to page 6) | |||
| Test: | • EN ISO 15848-1 / TA – Luft TÜV-Test-No. TA 07 2016 C04 |
| Plug design: • Plug with marginal seat standard |
| At high differential pressures a balancing plug is necessary! (refer to page 7) |
Bellows seal out of media flow path.
Especially for pulsating, turbulent flow directly behind pumps, elbows, junctions, etc
| Parts | |||
| Pos. | Sp.p. | Description | Fig. 45.067 |
| 1 | Body | P250 GH, 1.0460 | |
| 1.2 | Seat | G19 9 NbSi, 1.4551 | |
| 2 | Bellows housing | GP240GH+N, 1.0619+N | |
| 3 | x | Plug | X20Cr13+QT, 1.4021+QT (hardened) |
| 4 4.1 4.2 |
x |
Stem unit | |
| Bellows seal | X6CrNiMoTi17 12 2, 1.4571 | ||
| Stem | X5CrNi18-10, 1.4301 | ||
| 5 | Handwheel | Fe P01, 1.0330 (epoxy-coating) | |
| 6 | x | Packing ring | Pure graphite |
| 7 | Stud | 25CrMo4, 1.7218 | |
| 8 | Hexagon nut | C35E, 1.1181 | |
| 9 | x | Gasket | Pure graphite (CrNi laminated with graphite) |
| └ Spare parts | |||
| DN | 15 | 20 | 25 | 32 | 40 | 50 |
| Face-to-face dimension ETE series 1 according to DIN EN 12982 | |||||||
| L | (mm) | 130 | 150 | 160 | 180 | 200 | 230 |
| Dimensions Butt weld ends according to DIN EN 12627 – 4 (refer to page 6) | |||||||
| H4 | (mm) | 325 | 325 | 335 | 335 | 430 | 435 |
| ØC | (mm) | 175 | 175 | 175 | 175 | 225 | 225 |
| Travel | (mm) | 7 | 7 | 10 | 10 | 17 | 17 |
| Kvs-value | (m3/h) | 3,3 | 5,8 | 9,2 | 15 | 23,3 | 36 |
| Zeta-value | — | 7,4 | 7,6 | 7,4 | 7,4 | 7,5 | 7,7 |
| Zeta-value … range of tolerance for Kvs-values acc. to VDI/VDE 2173 | |||||||
| Weights | |||||||
| 45.067 | (kg) | 4,7 | 5,1 | 6 | 7 | 9 | 11,5 |
Information / restriction of technical rules need to be observed!
Operating and installation instructions can be downloaded at www.ari-armaturen.com. A production allowance acc. to TRB 801 No. 45 exists
The engineer, designing a system or a plant, is responsible for the selection of the correct valve.
Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).
ARI-FABA® LA 068
Stop valve – Y-pattern with long bellow and butt weld ends – long construction (Cast steel)
| Figure-No. | Nominal pressure | Material | Nominal diameter |
| 35.068 | PN40 | 1.0619+N | DN200-300 |
| Butt weld ends according to DIN EN 12627 – 4 (refer to page 6) | |||
| Test: | • EN ISO 15848-1 / TA – Luft TÜV-Test-No. TA 07 2016 C04 |
| Plug design: | • Plug with marginal seat standard |
| Parts | |||
| Pos. | Sp.p. | Description | Fig. 35.068 |
| 1 | Body | GP240GH+N, 1.0619+N | |
| 1.2 | Seat | G19 9 NbSi, 1.4551 | |
| 2 | Bellows housing | GP240GH+N, 1.0619+N | |
| 3 | x | Plug | X20Cr13+QT, 1.4021+QT (hardened) |
| 4 4.1 4.2 |
x |
Stem unit | |
| Bellows seal | X6CrNiMoTi17 12 2, 1.4571 | ||
| Stem | X5CrNi18-10, 1.4301 | ||
| 5 | Handwheel | EN-JL1040, EN-GJL-250 (epoxy-coating) | |
| 6 | x | Packing ring | Pure graphite |
| 7 | Stud | 25CrMo4, 1.7218 | |
| 8 | Hexagon nut | C35E, 1.1181 | |
| 9 | x | Gasket | Pure graphite (CrNi laminated with graphite) |
| └ Spare parts | |||
| DN | 200 | 250 | 300 |
| Face-to-face dimension ETE series 1 according to DIN EN 12982 | ||||
| L | (mm) | 600 | 730 | 850 |
| Dimensions Butt weld ends according to DIN EN 12627 – 4 (refer to page 6) | ||||
| H5 | (mm) | 830 | 890 | 935 |
| ØC | (mm) | 520 | 520 | 520 |
| Travel | (mm) | 50 | 65 | 75 |
| Kvs-value | (m3/h) | 709 | 1253 | 1655 |
| Zeta-value | — | 5,1 | 4 | 4,7 |
| Zeta-value … range of tolerance for Kvs-values acc. to VDI/VDE 2173 | ||||
| Weights | ||||
| 35.068 | (kg) | 110 | 245 | 290 |
Information / restriction of technical rules need to be observed!
Operating and installation instructions can be downloaded at www.ari-armaturen.com. A production allowance acc. to TRB 801 No. 45 exists
The engineer, designing a system or a plant, is responsible for the selection of the correct valve.
Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).
ARI-FABA® LA
Stop valve – straight through with long bellow and bellows seal
PHONE: 0812-3340-4116WHATSAPP: 0812-3340-4116
ARI ARMATUREN – Steam product solution
- ARI-FABA®-Plus Stop valve ARI Armaturen
- ARI-FABA®- Plus ANSI ARI Armaturen
- ARI-FABA®-Supra I Stop valve – Industrial version
- ARI-FABA®-Supra C Stop valve – Chemical version
- ARI-FABA® LA Stop valve ARI Armaturen
- ARI-STOBU® PN16-40 Stop valve with gland seal
- ARI-STOBU® PN63-160 Stop valve with gland seal
- ARI-EURO-WEDI Stop valve ARI Armaturen
PT Totalitas Teknik Indonesia
PT Totalitas Teknik Indonesia
PT Totalitas Teknik Indonesia
