ARI-Strainer

Screen and supporting basket made of stainless steel – PN 16- 40

Description

eClass-No.:	37011401
Application:	Recycling facilities, chemical industry, hospital technology, process water installations, installations with aggressive media
Medium:	Steam, gases, liquids, etc.

Scope of applications
Strainers are used for “cleanin flowing mediums“.

The information complies to the Pressure Equipment Directive 2014/68/EU.
It is the responsibility of the machine planner to ensure compliance.
The special markings on the valve must be taken into account.
Refer to the catalogue sheet to see which materials are used in standard versions.
Please contact the supplier or the manufacturer if you have any questions.

Operating principles
The medium flows through the strainer screen in the direction shown on the strainer and is thereby cleaned.

ARI-Strainer 050

Strainer – Y-pattern with flanges (Grey cast iron, SG iron, Cast steel)

ARI-Strainers Strainer with screen and supporting basket made of stainless steel

Figure	Nominal pressure	Material	Nominal diameter
10.050	PN6	EN-JL1040	DN15-200
12.050	PN16	EN-JL1040	DN15-300
22.050	PN16	EN-JS1049	DN15-300
23.050	PN25	EN-JS1049	DN15-150
34.050	PN25	1.0619+N	DN15-200
35.050	PN40	1.0619+N	DN15-200
A supporting basket is necessary, with higher differential pressures, dependent on clogging-up (DN >125 standard)
Test: • EN ISO 15848-1 / TA – Luft TÜV-Test-No. TA 09 2016 C04

Parts
Pos.	Sp.p.	Description	Fig. 10./12.050	Fig. 22./23.050	Fig. 34./35.050
1		Body	EN-JL1040, EN-GJL-250	EN-JS1049, EN-GJS-400-18U-LT	GP240GH+N, 1.0619+N
2		Cover	DN ≤150: EN-JL1040, EN-GJL-250 DN >150: P265 GH, 1.0425	DN ≤80: EN-JS1049, EN-GJS-400-18U-LT DN >80: P265 GH, 1.0425	DN ≤80: P250 GH, 1.0460 DN >80: P265 GH, 1.0425
3	x	Screen	X5CrNi18-10, 1.4301
3.1		Supporting basket	DN >125: X5CrNi18-10, 1.4301
4		Stud	25CrMo4, 1.7218
5		Hexagon nut	C35E, 1.1181
6	x	Gasket	Pure graphite (CrNi laminated with graphite)
	└ Spare parts

100

125

150

200

250

300

Face-to-face dimension FTF series 1 according to DIN EN 558 Standard-flange dimensions refer to page 7
L	(mm)	130	150	160	180	200	230	290	310	350	400	480	600	730	850

Weights
10.050	(kg)	2,5	3	4,5	5,5	7	9	13	19	26	38	54	110	—	—
12.050	(kg)	3	4	5	7	9	12	16	21	30	43	61	121	154	335
22.050	(kg)	3,5	4	5,5	7	9	12	16	21	28	41	58	115	154	335
23.050	(kg)	3,5	4	5,5	7	9	12	16	21	32	47	64	—	—	—
34./35.050	(kg)	4	5	6	8	10	13	19	24,5	35	51	71	144	—	—

Information / restriction of technical rules need to be observed!

Operating and installation instructions can be downloaded at www.ari-armaturen.com. ARI-Valves of EN-JL1040 are not allowed to be operated in systems acc. to TRD 110.

A production permission acc. to TRB 801 No. 45 is available (acc. to TRB 801 No. 45 EN-JL1040 is not allowed.) The engineer, designing a system or a plant, is responsible for the selection of the correct valve.

Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).

Weights
standard	(kg)	5	5	5,5	8	9,5	11,5	15,5	20,5	33	57	66
optional: Bellows design	(kg)	5,4	5,4	6	9	10,5	12,8	17,5	23	37	64	72

Weights
standard	(kg)	5	5	5,5	8	9,5	11,5	15,5	20,5	33	57	66
optional: Bellows design	(kg)	5,4	5,4	6	9	10,5	12,8	17,5	23	37	64	72

Pressure-temperature-ratings

Intermediate values for max. permissible operational pressures can be determined by linear interpolation of the given temperature / pressure chart.

acc. to DIN EN 1092-2			-60°C to <-10°C ¹⁾	-10°C to 120°C	150°C	200°C	250°C	300°C	350°C	400°C	450°C
EN-JL1040	PN16	(bar)	—	16	14,4	12,8	11,2	9,6	—	—	—
EN-JS1049	PN16	(bar)	on request	16	15,5	14,7	13,9	12,8	11,2	—	—

acc. to manufacturers standard			-60°C to <-10°C ¹⁾	-10°C to 120°C	150°C	200°C	250°C	300°C	350°C	400°C	450°C
1.0619+N	PN40	(bar)	30	40	38,1	35	32	28	25,7	23,8	13,1

acc. to DIN EN 1092-1			-60°C to <-10°C ¹⁾	-10°C to 100°C	150°C	200°C	250°C	300°C	350°C	400°C	450°C
1.4408	PN40	(bar)	40	40	36,3	33,7	31,8	29,7	28,5	27,4	—

Studs and nuts made of A4-70 (at temperatures below -10°C)

Certified coefficient of discharge Kdr (Values for D/G variable: < 3 bar)
DN	15	20	25	32	40	50	65	80	100	125	150
TÜV · SV · . . -811 · D/G	0,37		0,34		0,37	0,34	0,37	0,34		0,44	0,46
TÜV · SV · . . -811 · F	0,26		0,23		0,26	0,23	0,26	0,23		0,28	0,32

Certified coefficient of discharge Kdr (Values for D/G variable: < 3 bar)
DN	15	20	25	32	40	50	65	80	100	125	150
TÜV · SV · . . -811 · D/G	0,37		0,34		0,37	0,34	0,37	0,34		0,44	0,46
TÜV · SV · . . -811 · F	0,26		0,23		0,26	0,23	0,26	0,23		0,28	0,32

DN			15	20	25	32	40	50	65	80	100 125	150
Set pressure			Air 0°C and 1,013 bara (Nm³/h)
	0,2	(barg)	—	—	27	27	51	100	167	229	358 835	1225
	0,3	(barg)	24	24	34	49	67	128	217	294	460 1035	1588
	0,4	(barg)	28	28	41	41	78	152	252	349	546 1209	1908
	0,5	(barg)	32	32	47	47	90	176	292	405	632 1379	2156
	0,6	(barg)	37	37	53	53	102	199	330	459	717 1555	2418
	0,8	(barg)	45	45	63	63	125	237	404	545	852 1839	2871
	1	(barg)	52	52	73	73	144	274	466	631	986 2110	3288
	2	(barg)	86	86	123	123	240	461	777	1061	1657 3556	5471
	3	(barg)	123	123	176	176	340	658	1103	1514	2365 4947	7601
	4	(barg)	154	154	221	221	428	826	1385	1902	2970 6355	9754
	5	(barg)	185	185	266	266	515	995	1665	2290	3580 7735	11865
	6	(barg)	217	217	311	311	602	1165	1950	2680	4180 9041	13868
	7	(barg)	248	248	356	356	689	1330	2230	3065	4790 10348	15872
	8	(barg)	279	279	401	401	776	1500	2515	3450	5390 11654	17876
	9	(barg)	311	311	446	446	863	1670	2800	3840	6000 12961	19880
	10	(barg)	342	342	491	491	950	1835	3080	4225	6600 14267	21884
	12	(barg)	405	405	581	581	1125	2170	3645	5000	7800 16880	25892
	14	(barg)	468	468	671	671	1300	2510	4200	5780	9000 19493	29899
	16	(barg)	530	530	761	761	1475	2845	4770	6550	10200 22106	33907
	18	(barg)	593	593	851	851	1645	3180	5340	7320	11450 24718	37915
	20	(barg)	656	656	941	941	1820	3520	5900	8100	12650 27331	41922
	22	(barg)	718	718	1031	1031	1995	3855	6465	8870	13850 29944	45930
	24	(barg)	781	781	1121	1121	2170	4190	7030	9650	15100 32557	49938
	25	(barg)	812	812	1167	1167	2250	4360	7310	10040	15680 33863	51942
	26	(barg)	844	844	1211	1211	2340	4530	7595	10400 16300 35170
	28	(barg)	907	907	1302	1302	2520	4860	8160	11200 17500 37782
	30	(barg)	969	969	1390	1390	2690	5200	8720	12000 18700 40395
	32	(barg)	1032	1032	1480	1480	2870 5540		9290	12750 19900 43008
	35	(barg)	1126	1126	1620	1620	3130 6040		10130	13900 21700 46927
	36	(barg)	1155	1155	1665	1665	3215 6220		10420	14300 22360 48234
	40	(barg)	1283	1283	1840	1840	3560 6880		11500	15850 24700 53459

DN			15	20	25	32	40	50	65	80	100	125	150
Set pressure			Water 20°C (t/h)
	0,2	(bar)	—	—	0,97	1,4	1,95	3,63	6,33	8,36	13,06	26,4	44,3
	0,3	(bar)	0,84	0,84	1,16	1,67	2,33	4,30	7,46	9,80	15,22	32,3	54,3
	0,5	(bar)	1,11	1,11	1,54	2,21	3,09	5,74	10,0	13,22	20,6	41,8	70,1
	1	(bar)	1,57	1,57	2,17	3,13	4,37	8,12	14,15	18,69	29,2	59,1	99,1
	2	(bar)	2,22	2,22	3,07	4,42	6,17	11,48	20,0	26,4	41,3	83,6	140,2
	3	(bar)	2,72	2,72	3,76	5,42	7,56	14,07	24,5	32,4	50,6	102,4	171,7
	4	(bar)	3,14	3,14	4,35	6,26	8,73	16,24	28,3	37,4	58,4	118,2	198,3
	5	(bar)	3,51	3,51	4,86	7,0	9,76	18,16	31,6	41,8	65,3	132,2	221,7
	6	(bar)	3,85	3,85	5,32	7,66	10,69	19,89	34,6	45,8	71,6	144,8	242,9
	7	(bar)	4,16	4,16	5,75	8,28	11,55	21,5	37,4	49,5	77,3	156,4	262,3
	8	(bar)	4,45	4,45	6,14	8,85	12,35	23,0	40,0	52,9	82,6	167,2	280,4
	9	(bar)	4,72	4,72	6,52	9,39	13,1	24,4	42,4	56,1	87,6	177,4	297,5
	10	(bar)	4,97	4,97	6,87	9,89	13,81	25,7	44,7	59,1	92,4	187,0	313,5
	12	(bar)	5,44	5,44	7,53	10,84	15,12	28,1	49,0	64,8	100,2	204,8	343,5
	14	(bar)	5,88	5,88	8,13	11,71	16,34	30,4	52,9	69,9	109,3	221,2	371,0
	16	(bar)	6,29	6,29	8,69	12,51	17,46	32,5	56,6	74,8	116,8	236,5	396,6
	18	(bar)	6,67	6,67	9,22	13,27	18,52	34,4	60,0	79,3	123,9	250,9	420,7
	20	(bar)	7,03	7,03	9,72	14,0	19,53	36,3	63,3	83,6	130,6	264,4	443,4
	22	(bar)	7,37	7,37	10,19	14,7	20,5	38,1	66,3	87,7	137,0	277,4	465,1
	24	(bar)	7,7	7,7	10,64	15,33	21,4	39,8	69,3	91,6	143,1	289,7	485,8
	25	(bar)	7,86	7,86	10,86	15,64	21,8	40,6	70,7	93,3	146,0	295,7	495,8
	26	(bar)	8,0	8,0	11,06	15,92	22,2	41,3	72,0	95,1 148,6 301,5
	28	(bar)	8,3	8,3	11,47	16,52	23,1	42,9	74,7	98,7 154,2		312,9
	30	(bar)	8,6	8,6	11,88	17,1	23,9	44,4	77,3	102,2 159,7		323,9
	35	(bar)	9,28	9,28	12,83	18,47	25,8 47,9		83,5	110,4 172,5		349,8
	36	(bar)	9,4	9,4	13,0	18,7	26,1 48,7		84,7	111,9 174,9		354,8
	40	(bar)	9,92	9,92	13,71	19,75	27,6 51,3		89,3	118,0 184,4		374,0

ARI-Strainer 059

Strainer – Y-pattern with flanges (Stainless steel)

ARI-Strainers Strainer with screen and supporting basket made of stainless steel

Figure	Nominal pressure	Material	Nominal diameter
52.059	PN16	1.4408	DN15-200
54.059	PN25	1.4408	DN15-200
55.059	PN40	1.4408	DN15-200

A supporting basket is necessary, with higher differential pressures, dependent on clogging-up (DN >125 standard)

Test:

• EN ISO 15848-1 / TA – Luft TÜV-Test-No. TA 09 2016 C04

Parts
Pos.	Sp.p.	Description	Fig. 52./54./55.059
1		Body	GX5CrNiMo19-11-2, 1.4408
2		Cover	X6CrNiMoTi17-12-2, 1.4571
3	x	Screen	X6CrNiMoTi17-12-2, 1.4571
3.1		Supporting basket	DN >125: X6CrNiMoTi17-12-2, 1.4571
4		Stud	A4-70
5		Hexagon nut	A4
6	x	Gasket	Pure graphite (CrNi laminated with graphite)
	└ Spare parts