ARI-FABA®- Plus ANSI

ANSI-Stop valve – straight through with bellows seal

ARI-FABA®- Plus ANSI-Stop valve - straight through with bellows seal
ARI-FABA®- Plus ANSI-Stop valve - straight through with bellows seal
ARI-FABA®- Plus ANSI-Stop valve - straight through with bellows seal
ARI-FABA®- Plus ANSI-Stop valve - straight through with bellows seal
ARI-FABA®- Plus ANSI-Stop valve - straight through with bellows seal
eClass-No.: 37010201
Application: Industry, powerstations, flue gas purification plant, processing technology, gas supply, vapour facilities, recycling facilities, vacuum facilities, hot water, heating technology, district heating, thermal oil applications, general plant manufacturing, etc.
Medium: Steam, gases, hot water, thermal oil, process water, vacuum facilities, ammonia etc.

• Double wall bellows seal as standard
• Plug with marginal seat
• Stem with fine thread
• Flat lubricating nipple
• Locking device, countersunk
• Bonnet optimised for accessories
• Secondary sealing: gland packing
• Position indicator as standard
• Non-rotation lock for each nominal diameter
Additional features ARI-FABA®-Supra:
• Bellows seal welded to bonnet
• Bellows seal 10.000 load cycles
• Industrial version: Bellows seal shielded
Chemical version: Bellows seal flushed
• Stem back seal
• Yoke gasket, double chambered
• Welded seat
• Actuator retrofitting

Stop valve – straight through with flanges and bellows seal – Class 150 / 300 (SA216WCB)

ARI-FABA®- Plus ANSI-Stop valve - straight through with bellows seal

Figure-No. Nominal pressure Material Nominal diameter
32.041 ANSI150 SA216WCB DN 15-250 / NPS 1/2″-10″
35.041 ANSI300 SA216WCB DN 15-250 / NPS 1/2″-10″
Test: • EN ISO 15848-1 / TA – Luft TÜV-Test-No. TA 07 2016 C04
Flanges: • acc. to ASME / ANSI B16.5
Plug design: • Plug with marginal seat standard
Parts
Pos. Sp.p. Description Fig. 32. / 35.041
1 Body SA216WCB
1.2 Seat E347-16
2 Bonnet SA216WCB
3 x Plug ≤ DN200 / NPS 8″: SA276Gr.420 1) (hardened) / DN250 / NPS 10″: SA516Gr.60 / Stellit 21
4 4.1 4.2

x

 Spindle unit
Bellows seal SA240Gr.316Ti
Stem SA276Gr.420 1)
5 x Handwheel ≤ DN100 / NPS 4″: A366 (cataphoretic coating) / ≥ DN150 / NPS 6″: SA278Class40 (epoxy-coating)
6 Packing ring Pure graphite
7 Stud SA193-B7
8 Hexagon nut SA194-2H
9 x Gasket Pure graphite (CrNi laminated with graphite)
└ Spare parts
DN 15 20 25 40 50 65 80 100 150 200 250
NPS 1/2″ 3/4″ 1″ 1 1/2″ 2″ 2 1/2″ 3″ 4″ 6″ 8″ 10″
Face-to-face dimension acc. to ANSI B16.10
L2 ANSI150 (mm) 108 117 127 165 203 216 241 292 406 495 622
ANSI300 (mm) 152 178 203 229 267 292 318 356 444 559 622
Dimensions Standard-flange dimensions refer to page 12
H1 (mm) 205 205 210 225 230 245 265 365 425 550 720
ØC (mm) 125 125 125 150 150 175 225 300 400 520 520
Travel (mm) 6 6 8 13 13 16 20 25 40 50 70
Kvs-value ANSI150 (m3/h) 4,8 6,6 11,1 26,5 41 70 100 153 378 610 980
Zeta-value ANSI150 — 3,5 5,9 5,1 5,8 5,9 5,8 6,5 6,8 5,7 6,9 6,5
Kvs-value ANSI300 (m3/h) 5,3 7,2 12 28,5 43 75 105 170 405 675 1090
Zeta-value ANSI300 — 2,9 4,9 4,3 5 5,4 5,1 5,9 5,5 4,9 5,6 5,2
Weights
32.041 (kg) 5,2 5,4 5,8 6,5 12 21 24,5 40,2 78 168 261
35.041 (kg) 5,4 6,3 8,6 9,5 14,9 23 29 49,2 94 211 317

Information / restriction of technical rules need to be observed!

Operating and installation instructions can be downloaded at www.ari-armaturen.com. A production allowance acc. to TRB 801 No. 45 exists.

The engineer, designing a system or a plant, is responsible for the selection of the correct valve.

Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list).

ARI-FABA®- Plus ANSI

ANSI-Stop valve – straight through with bellows seal

PHONE: 0812-3340-4116

ARI ARMATUREN – Steam product solution

Related Products

©2022 PT. TOTALITAS TEKNIK INDONESIA. All Rights Reserved.
ARI-FABA®-Supra IARI-FABA®-Supra I Stop valve - straight through with butt weld ends and bellows seal - Industrial versionARI-FABA®-Plus Stop valve - straight through with flanges and bellows sealARI-FABA®-Plus