SC20 Food+ and SCS20

Sample Coolers

The Spirax Sarco SC20 sample cooler is used to cool samples of boiler water or steam.
The cooler consists of a 316L stainless steel coil, through which the sample flows, and a 316L stainless steel body, through which cooling water flows and utilises a counter current
flow to maximise cooler efficiency.
The unit is provided with integral pre-drilled mounting brackets to allow simple installation at point of use.
The SC20 is also available with a clamp adaptor for connecting to an industry standard ½” sanitary clamp fitting.

SC20 Food+
Designed, manufactured and approved for Steam and Condensate applications.
This product is intended to be connected into a system that can operate a food contact compliant process.

This product complies with:

  • (EC)1935:2004 Materials and Articles Intended to come into Contact with Food
  • (EC)2023:2006 Good Manufacturing Practice for Materials and Articles Intended to come into Contact with Food
  • FDA Code of Federal Regulations – title 21 – Food and Drugs

A list of the materials that could come directly or indirectly into contact with foodstuffs can be found in the Declaration of Compliance available for this product.

  • For boiler water, steam, or condensate sampling.
  • Stainless steel body and coil to minimise corrosion.
  • Self-draining design to eliminate sample retention.
  • Counter current flow for efficient cooling.
  • Integral mounting bracket to facilitate simple installation.

SC20 Food+ Range
BSP connections (6 mm (0.24″) O/D tube).

NPT connections (6 mm (0.24″) O/D tube).
A ¼” NPT male x 6 mm (0.24″) O/D stud coupling is supplied loose for connecting the sample
inlet tube to an NPT inlet valve or fitting.

A sample cooler (BSP or NPT) with a clamp adaptor suitable for connection to an industry standard ½” ASME BPE compatible sanitary
clamp fitting (clamp not supplied).

SCS20 Range
BSP sample cooler kit (SCS20), complete with sample inlet valve, cooling water inlet valve, and carbon steel fittings.

A kit (SCS20), as above, but with stainless steel fittings.

Note: ONLY the SC20 product is available as EC1935:2004 compliant. The SCS20 systems are not.

Note: The SC20 sample cooler is not polished or specially treated internally, and the internal finish of the coil is not specified.

Stainless steel couplings are also available separately:
¼” BSP male x 6 mm (0.24″) O/D tube.
¼” NPT male x 6 mm (0.24″) O/D tube.

The SC20 Food+ can be supplied with the following certification if requested at the time of ordering:

  • EN 10204 3.1 material certificates – Chargeable
  • EC1935:2004 Declaration of Compliance – F.O.C.
  • Declaration of Conformity BS EN ISO 14644-1:2015 Class 7 Clean Room – F.O.C.
  • TSE-BSE Statement – F.O.C.
  • FDA Code of Federal Regulations – title 21 – Food and Drugs – F.O.C
Cooling water inlet and outlet connections BSP T Rp (ISO 7-1) version ½” BSP
NPT version ½” NPT
Clamp adaptor versions ½” BSP or ½” NPT
Sample tube inlet and outlet connections BSP T Rp (ISO 7-1) version 6 mm (0.24″) O/D
NPT version 6 mm (0.24″) O/D*
Clamp adaptor versions 6 mm (0.24″) O/D with ½” ASME BPE compatible adaptor for clamp fitting

* A ¼” NPT male x 6 mm O/D stud coupling is provided.

Maximum design pressure 10 bar g @ 100 °C (145 psi g @ 212 °F)
Maximum design temperature 100 °C @ 10 bar g (212 °F @ 145 psi g)
Designed for a maximum cold hydraulic test pressure of 16 bar g (282 psi g)

Note: The pressure/temperature limits for the clamp adaptor are dependant on the manufacturer’s recommendations.

Coil Stainless steel 316L (1.4404)
Body

©2022 PT. TOTALITAS TEKNIK INDONESIA. All Rights Reserved.
Chat now!
Scan the code
Hi Totalitas Teknik Indonesia I need more info..