CSF16 and CSF16T

Stainless Steel Steam Filters

Description

The CSF16 and CSF16T are horizontal, in-line, high efficiency separators and are designed and manufactured to remove particulate contamination from steam systems.
This product complies with EC1935:2004 Food Contact Materials. It also complies with regulation
EC2023:2006 on good manufacturing practice for materials and articles intended to come into contact with food.

Industry	Steam In CSF16/CSF16T	Steam Out CSF16/CSF16T
Pharmaceutical	Plant Steam	Filtered Plant Steam
Healthcare
Other industries
Food and Beverage		Culinary Steam* *when 5µm filter element or finer is selected

CSF16 and CSF16T Stainless Steel Steam Filters

Filter Housing model	Sizes	Material of Filter Housing (Bowl and Head)	Connection type (Bowl and Head)	Internal surface finish	External surface finish
CSF16, CF16L, CSF16H	DN8 (¼”) to DN80 (3″)	1.4301 (304 stainless steel)	Food industry fitting to DIN 11851	Etched, Passivated and Polished Ra 0.8µm	Etched, Passivated and Polished Ra 1.6µm
CSF16, CF16L, CSF16H	DN100 (4″) and DN150 (6″)	1.4301 (304 stainless steel)	Nuts and Bolts	Etched, Passivated and Polished Ra 0.8µm	Etched and Passivated, Ra 5.8 micron
CSF16T, CF16LT, CSF16HT	DN8 (¼”) to DN80 (3″)	1.4404 (316L stainless steel)	Food industry fitting to DIN 11851	Etched, Passivated and Polished Ra 0.8µm	Etched, Passivated and Polished Ra 1.6µm
CSF16T, CF16LT, CSF16HT	DN100 (4″) and DN150 (6″)	1.4404 (316L stainless steel)	Nuts and Bolts	Etched, Passivated and Polished Ra 0.8µm	Etched and Passivated, Ra 5.8 micron.

*In some pipe sizes the housing is available in a choice of low capacity designated ‘L’ and high capacity designated ‘H’.

Replaceable elements in sintered austenitic stainless steel are available with either 1, 5 or 25 micron absolute rating.
These are ordered separately to the Filter Housing.

Standards

These products fully comply with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations and carry the / marks when so required.
The CSF16/CSF16T steam filters also comply with other country specific approvals:

When fitted with a 5 micron filter element, they are capable of removing 95% of particles 2 microns and larger in size, in accordance with the requirements for the production of culinary steam to 3A accepted practice number 609-03 (accepted in the US).
This is subject to the installation being in accordance with 3A best practice guidelines (See installation section in IM-P180-42).

Department of Agriculture for use in federally inspected meat and poultry plants. All materials meet the requirements as stipulated by
the US FDA Title 21 of Code of Federal Regulations.

All constituent materials and the finished product comply with EC1935:2004 and EC2023:2006
The complete product and component parts are, manufactured, assembled, tested and packaged in a facility verified and approved by
an accredited registered body to ISO 9001:2015.

Certification

The CSF16/CSF16T can be supplied with material certification as per the table below. Note: All certification/inspection requirements must be stated at the time of order placement.

Housing PED Category (SEP, Category I, Category II)	EN10204 Inspection Documents
SEP	No certification supplied
Cat. I No certification supplied	Cat. II Type 3.1 (Inspection Certificate

If type 3.1 certification is required for SEP or Cat. I Filter Housings, this must be ordered separately.
If type 3.1 certification is required for the filter elements, this must be ordered separately