CS10-1

Stainless Steel Clean Steam Separator

Description

The CS10-1 clean steam separator has been designed in full accordance with the ASME BPE guide to overcome the issues of removing
entrained moisture from clean and pure steam systems.
It has also been designed with the feature of a removable baffle plate, allowing the unit to be fully inspected prior to installation and to facilitate system internal inspection.

Standard surface finish
Internal 0.5 µm (20 micro-inch) Ra maximum/SF5 – as outlined in ASME BPE, with all welds ground and electropolished.
External 1.6 µm Ra maximum, with a satin bead blast finish.

Standards
This product has been designed in accordance with the ASME BPE guide.
It also complies with the requirements of the EU Pressure Equipment Directive/UK Pressure Equipment (Safety) Regulations.
All polymers used comply with FDA regulation CFR 21 part 177 section 2600.
½”, ¾” and 1″ sizes are available with USP class VI.

Certification

This product is available with the following certification:

EN 10204 3.1 material certifications.
Certificates of conformities.
Passivation certificates.
Welding certificates.
Internal surface finish certificate.

Note: All certification/inspection requirements must be stated at the time of order placement.

Packaging

CS10-1 Stainless Steel Clean Steam Separator

Packaging for this product is conducted in a clean environment, segregated from other non stainless steel products, and in accordance with ASME BPE for optimum protection and cleanliness; Connections of the product are fitted with protective caps before being sealed in a plastic bag.

Sizes and pipe connections

Steam inlet and outlet pipe	½”, ¾”, 1″, 1½” and 2″
	Sanitary clamp ASME BPE (Sanitary Clamp) or
	DIN 32676 upon request.
	Extended tube weld ends (ETO) ASME BPE or
	DIN 11850 upon request.
Drain	1″ ASME BPE (Sanitary Clamp)
Vent	½” ASME BPE (Sanitary Clamp)

Materials

CS10-1 Stainless Steel Clean Steam Separator

No.	Part	Material
1	Body	Fabricated stainless steel
			1.4404 316L
			1.4404 316L
			1.4404 316L
2	Cover + Baffle	Fabricated stainless steel
			1.4404 316L
			1.4404 316L
3	Seal	Viton
4	Clamp	Stainless steel	AISI 316