SUPMEA SUP-FMC400

Low Conductivity Electromagnetic flow meter

Description

SUP-FMC400 Low Conductivity Electromagnetic flow meter

The SUPMEA SUP‑FMC400 Low Conductivity Electromagnetic Flow Meter is engineered for demanding environments that challenge traditional flow measurement—offering ±0.5% accuracy, zero moving parts, comprehensive RS485 communication, and compatibility with low-conductivity media across industries like tap water, chemical industry, coal, environmental protection, light textile, metallurgy, papermaking, etc.

The electromagnetic flowmeter is designed based on the Faraday electromagnetic induction principle and used to measure the instantaneous flow rate of conductive liquids in enclosed pipelines in flammable and explosive environments. During on-site monitoring and display, standard current signals, pulse signals, and RS485 digital signals can be output for recording, adjustment, and control, achieving automatic detection and control.

Characteristics

Accuracy: Measurement value±0.5%(Flow velocity 0.5m/s~5m/s)
Direct measured variables ：Flow velocity
Calculated measured variables ：Volume flow , mass flow
Velocity of flow：Typically Velocity of flow：0.5m/s~5m/s

Note：If there are differences in the selection of individual specifications, the label shall prevail, and high-voltage can be customized.

Specifications

Product	Electromagnetic flowmeter
Model	SUP-FMC400
Diameter nominal	DN10~DN1000
Nominal pressure	DN15 – DN250, PN ≤1.6MPa
Nominal pressure	DN300 – DN1000, PN ≤1.0MPa
Accuracy	Measurement value ±0.5%(Flow velocity 0.5m/s~5m/s)
Repetitiveness	0.16%
Liner material	CR,UR,PTFE(F4),FEP(F46),and PTFE(PTA)
Electrode material	316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt
Medium temperature	Polyurethane: -10…+60℃ ;PTFE/FEP: -10…+120℃;Chloroprene: -10…+70℃；PFA: -10…+120℃
Power supply	AC：85V~264V，50Hz~60Hz; DC：18V~28V
Communications	RS485,MODBUS-RTU
Ingress protection	IP65