KLINGER Piston Valves KVMN ½”-2″ Threaded Sleeve Design

KLINGER Piston Valves KVMN ½"-2" Threaded Sleeve Design
KLINGER Piston Valves KVMN ½"-2" Threaded Sleeve Design
KLINGER Piston Valves KVMN ½"-2" Threaded Sleeve Design
KLINGER Piston Valves KVMN ½"-2" Threaded Sleeve Design
KLINGER Piston Valves KVMN ½"-2" Threaded Sleeve Design

KLINGER Piston Valves KVMN ½”-2″ Threaded Sleeve Design

KLINGER Piston Valves KVMN ½”–2″ Threaded Sleeve Design offer reliable shut-off performance and excellent sealing characteristics for industrial applications.
Featuring dual KX-GT elastic sealing rings, robust construction, and DIN or NPT threaded connections, these valves are available in grey cast iron and cast steel configurations.
Suitable for various industrial piping systems, including oil & gas, petrochemical, power generation, and manufacturing.
Contact PT. Totlitas Teknik Indonesia for product specifications, availability, and competitive quotations.

  • Piston valve with bore
  • Sealing via two elastic KX-GT valve rings
  • Excellent control characteristics
  • Fire Safe
  • Special regulating design available (KVRKMN)

DIN sleeved connections with pipe threads in accordance with ISO 228-1 (III, VIII),
NPT sleeved connections
in accordance with ANSI B2.1 (VIII)

DIN 3202-M9
KLINGER Piston Valves KVMN ½

Dimensions PN Weight in kg
DN L H A Hub III VIII PN 16 PN 63
1/2″ 100 105 100 23 16 63 1.6 1.8
3/4″ 120 122 120 28 16 63 2.5 2.5
1″ 135 140 140 34 16 63 3.6 3.7
1 1/4″ 160 157 160 38 16 63 5.9 5.9
1 1/2″ 185 184 180 45 16 63 8.4 8.6
2″ 220 211 200 51 16 63 12.4 13.1
DIN sleeved connections NPT sleeved connections
DN d1 t1 t2 SW d1 t1 t2
1/2″ G1/2″ 15.5 19.5 36 1/2″-14NPT 13.5 19.5
3/4″ G3/4″ 16 20 41 3/4″-14NPT 14 20
1″ G1″ 17 22 50 1″-11 1/2NPT 17 24
1 1/4″ G1 1/4″ 19 25 65 n.a. n.a. n.a.
1 1/2″ G1 1/2″ 19 24 75 1 1/2″-11 1/2NPT 17 24.5
2″ G2″ 26 31 90 2″-11 1/2NPT 18 25
  • Seat leak tightness: EN 12266-1 P12, leakage rate A
  • Tightness to atmosphere: EN 12266-1 P11
  • Strength: EN 12266-1 P10

-10 °C to +400 °C (see P-T diagram)

  • Grey cast iron EN-GJL-250/5.1301 (Material code III)
  • Cast steel 1.0619 (Material code VIII)

KLINGER Piston Valves KVMN ½”-2″ Threaded Sleeve Design

KLINGER Fluid Control Supplier Indonesia – PT. Totalitas Teknik Indonesia

When it comes to reliable fluid control in industrial piping systems, choosing the right valve is essential for maintaining operational efficiency, safety, and long-term equipment performance. KLINGER Piston Valves KVMN ½”–2″ Threaded Sleeve Design offer an effective solution for industrial applications requiring dependable shut-off performance, excellent sealing characteristics, and durable construction.

PT. Totlitas Teknik Indonesia provides industrial valve solutions for businesses seeking reliable products for their plant operations, maintenance activities, and engineering projects.

The KLINGER KVMN series is designed with advanced piston sealing technology and threaded sleeve connections, making it a practical choice for various industrial piping applications.

If you are looking for KLINGER KVMN piston valves with DIN or NPT threaded connections, PT. Totlitas Teknik Indonesia is ready to assist with your product inquiries and procurement requirements.

The KLINGER KVMN Piston Valve is an industrial shut-off valve featuring a straight-through piston design and threaded sleeve connections. It is engineered to provide reliable sealing performance through two elastic KX-GT valve rings.

Unlike conventional valve designs, the KLINGER piston valve uses a piston and sealing ring arrangement to achieve effective isolation and dependable sealing performance.

The KVMN series is available in nominal sizes ranging from ½ inch to 2 inches, offering flexibility for different industrial piping configurations.

Its threaded sleeve design supports installation using DIN pipe threads or NPT connections, depending on the selected material configuration.

The product is suitable for industrial applications where reliable shut-off, operational flexibility, and robust valve construction are important.

The KLINGER KVMN piston valve incorporates several engineering features designed to support reliable industrial operation.

1. Advanced Dual KX-GT Sealing System

The KVMN piston valve features two elastic KX-GT valve rings designed to provide effective sealing between the piston and valve body.

This sealing technology helps achieve reliable shut-off performance and minimizes leakage under specified operating conditions.

2. Excellent Operating and Control Characteristics

The piston valve design provides excellent operating and control characteristics.

It is suitable for applications requiring dependable flow isolation and controlled valve operation.

3. Fire-Safe Design

KLINGER KVMN features a fire-safe design, providing an important consideration for industrial facilities where fire safety is a key equipment requirement.

Specific fire-safety approvals and certifications should be confirmed for the selected product configuration.

4. Flexible Threaded Sleeve Connections

One of the main advantages of the KVMN series is its threaded sleeve connection design.

Available connection configurations include:

  • DIN threaded connections according to ISO 228-1.

  • NPT threaded connections according to ANSI B2.1.

DIN connections are available for both material codes III and VIII, while NPT connections are available in cast steel material code VIII.

This flexibility makes it easier to select a valve configuration according to existing piping standards and project specifications.

5. Durable Industrial Materials

The KLINGER KVMN piston valve is available in two primary body material configurations:

  • Grey Cast Iron EN-GJL-250 / 5.1301 (Material Code III).

  • Cast Steel 1.0619 (Material Code VIII).

These material options provide different pressure and temperature capabilities to accommodate specific industrial requirements.

Understanding the technical specifications is important when selecting the appropriate piston valve for your application.

The following table summarizes the manufacturer’s published product specifications.

Technical Parameter Specification
Brand KLINGER
Product Series KVMN
Product Type Piston Shut-Off Valve
Design Threaded Sleeve
Nominal Size ½”–2″
Sealing System Two Elastic KX-GT Valve Rings
Body Material III Grey Cast Iron EN-GJL-250
Body Material VIII Cast Steel 1.0619
Connection DIN ISO 228-1
Connection NPT ANSI B2.1
Face-to-Face Dimension DIN 3202-M9
Pressure Rating III PN 16
Pressure Rating VIII PN 63
Temperature Range Material-dependent, see below
Seat Leakage Test EN 12266-1 P12, Leakage Rate A
Atmospheric Tightness Test EN 12266-1 P11
Strength Test EN 12266-1 P10

Operating Pressure and Temperature

The pressure and temperature limits depend on the selected body material.

    • Grey Cast Iron (Material III): PN 16, temperature up to +300°C.

    • Cast Steel (Material VIII): PN 63, temperature up to +400°C.

    • Minimum temperature: -10°C.

Actual permissible operating conditions must be verified against the manufacturer’s pressure-temperature diagram.

The KVMN series is available in six nominal sizes, from ½ inch to 2 inches.

The following dimensions and weights are based on the manufacturer’s product catalogue.

Nominal Size Length (L) Height (H) Dimension A Approx. Weight PN 16 Approx. Weight PN 63
½” 100 mm 105 mm 100 mm 1.6 kg 1.8 kg
¾” 120 mm 122 mm 120 mm 2.5 kg 2.5 kg
1″ 135 mm 140 mm 140 mm 3.6 kg 3.7 kg
1¼” 160 mm 157 mm 160 mm 5.9 kg 5.9 kg
1½” 185 mm 184 mm 180 mm 8.4 kg 8.6 kg
2″ 220 mm 211 mm 200 mm 12.4 kg 13.1 kg

All dimensions are in millimeters. Weights are approximate and subject to product configuration and manufacturer revisions.

The KLINGER KVMN piston valve supports different threaded sleeve configurations to accommodate industrial piping requirements.

DIN Threaded Connections

DIN threaded connections follow ISO 228-1 and are available for cast iron and cast steel configurations.

These connections are suitable for compatible piping systems using the specified parallel pipe thread arrangement.

NPT Threaded Connections

NPT threaded connections follow ANSI B2.1 and are available for the cast steel configuration (Material Code VIII).

NPT connections are commonly specified in industrial piping systems that use American tapered pipe thread standards.

Before purchasing, it is important to verify the thread standard, nominal size, material, and piping compatibility to avoid installation issues.

KLINGER KVMN piston valves can be considered for different industrial fluid handling applications, depending on the process medium and operating conditions.

Oil and Gas Industry

Suitable for compatible piping applications requiring reliable shut-off performance and robust valve construction.

Petrochemical Industry

Can be used in selected process systems where effective sealing and dependable isolation are essential.

Power Generation Industry

Suitable for compatible steam and condensate applications within the specified pressure and temperature limits.

Chemical Processing Industry

Can be considered for industrial fluid systems where valve material compatibility and reliable sealing are important.

Manufacturing and Industrial Plants

Suitable for utility piping, equipment connections, and other industrial fluid control applications.

The final valve selection should always consider the process medium, operating pressure, temperature, connection standard, and material compatibility.

Selecting the right industrial valve can help improve operational reliability and simplify equipment maintenance.

The KLINGER KVMN series offers several advantages:

    • Reliable sealing with two elastic KX-GT valve rings.

    • Excellent operating and control characteristics.

    • Fire-safe design.

    • DIN and NPT threaded sleeve options.

    • Available in grey cast iron and cast steel configurations.

    • Pressure ratings up to PN 63, depending on material.

    • Operating temperatures up to +400°C for the specified cast steel configuration.

    • Manufacturer-tested sealing and pressure integrity.

    • Compact design for compatible industrial piping installations.

These features make KLINGER KVMN an attractive option for industrial facilities requiring dependable piston valve technology.

PT. Totlitas Teknik Indonesia is committed to supporting industrial equipment procurement requirements with suitable valve solutions and professional product assistance.

We understand that industrial customers require more than just a product. They also need accurate technical information, suitable material specifications, compatible connections, and reliable procurement support.

Whether you are purchasing KLINGER KVMN piston valves for a new engineering project, plant maintenance, equipment replacement, or industrial system upgrades, our team is ready to assist.

Our product support includes:

    • KLINGER KVMN piston valve inquiries.

    • DIN and NPT threaded sleeve configurations.

    • Product size and material identification.

    • Technical specification assistance.

    • Industrial valve quotation requests.

    • Procurement support for industrial projects.

We aim to help customers identify suitable industrial valve solutions based on their technical and operational requirements.

Are you looking for KLINGER Piston Valves KVMN ½”–2″ Threaded Sleeve Design for your industrial application?

PT. Totlitas Teknik Indonesia is ready to assist you with product inquiries, technical specifications, and quotation requests.

Whether you require grey cast iron or cast steel configurations, DIN threaded connections, or NPT threaded connections, our team can help you identify the appropriate product specifications for your project.

Contact PT. Totlitas Teknik Indonesia today to request a quotation and discuss your industrial valve requirements.

PT. Totlitas Teknik Indonesia

Your Trusted Partner for Industrial Valves and Engineering Equipment Solutions.

Get in touch with us today for your KLINGER KVMN piston valve requirements.

Related Products

©2022 PT. TOTALITAS TEKNIK INDONESIA. All Rights Reserved.
Piston Valves KVSN ½”-2″KLINGER Piston Valves KVSN ½” – 2″ Butt and Socket Weld EndsPT Totalitas Teknik Indonesia