GESTRA Drain Module QuickEM & QuickEM Control | PN16 PN40 | DN 15–50

GESTRA Drain Module QuickEM & QuickEM Control | PN16 PN40 | DN 15–50
GESTRA Drain Module QuickEM & QuickEM Control | PN16 PN40 | DN 15–50
GESTRA Drain Module QuickEM & QuickEM Control | PN16 PN40 | DN 15–50

GESTRA Drain Module QuickEM & QuickEM Control | PN16 PN40 | DN 15–50

GESTRA QuickEM is a pre-assembled drain module to be used in installations for heat recovery. The drain module is suitable for discharging condensed water. The QuickEM assembly consists of two or three shut-off valves, one steam trap type BK…, MK… or UNA…, one sightglass, one wafer-type non-return valve RK… as well as pipes and all necessary flanges, flange gaskets and bolts. Counterflanges with bolts and gaskets are not part of the delivery.

The QuickEM Control is designed for electronic condensate monitoring. Instead of the sightglass the measuring electrode NRG 16… is installed as sensor for electronic condensate monitoring.

If the QuickEM Control assembly is fitted with steam traps type BK 45, MK 45 and UNA 4… the measuring electrode NRG 16… is installed directly in the steam trap.

If the QuickEM Control assembly is fitted with steam traps type BK 15, MK 25 una UNA 1… the measuring electrode NRG 16… is installed in a test chamber VKE.

QuickEM and QuickEM Control are available for horizontal or vertical installation. Note that QuickEM Control with trap type UNA… is only available for horizontal installation!

QuickEM and QuickEM Control are available with or without bypass line.

QuickEM

Steam and condensate flows through the shut-off valve to the steam trap. The regulator in the steam trap discharges the condensate from the live steam system through the second shut-off valve into the condensate collecting sys- tem. The two shut-off valves can isolate the steam trap if the need arises (e. g. for mainenance work). The integrat- ed bypass line is designed for bypassing the steam trap if necessary.

QuickEM Control

Same function as QuickEM but the measuring electrode NRG 16… is used as sensor for electronic condensate mon- itoring. The steam traps are monitored for banking-up of condensate (waterlogging) and steam loss.

The two shut-off valves can isolate steam traps equipped with measuring electrode or with test chamber if the need arises (e. g. for mainenance work). The integrated bypass line is designed for bypassing the steam trap if necessary.

  • Flanged EN 1092-1 B1 PN 16, PN 40

GESTRA Drain Module QuickEM & QuickEM Control | PN16 PN40 | DN 15–50

GESTRA: The Ultimate Solution for Industrial Steam & Fluid Control Systems

Condensate accumulation is a major cause of energy loss, corrosion, and system damage in steam and compressed air systems. The GESTRA Drain Module QuickEM and QuickEM Control provide an intelligent, fully automatic drainage solution designed to remove condensate without steam or air loss.

With pressure ratings PN 16 and PN 40 and sizes DN 15, 20, 25, 40, and 50, GESTRA QuickEM sets a new benchmark for reliable, energy-efficient condensate management in industrial applications.

GESTRA Drain Module QuickEM

  • Pressure Rating: PN 16 / PN 40

  • Nominal Diameter: DN 15, 20, 25, 40, 50

  • Function: Automatic condensate discharge

  • Application: Steam & compressed air systems

GESTRA QuickEM Control

  • Pressure Rating: PN 16 / PN 40

  • Nominal Diameter: DN 15, 20, 25, 40, 50

  • Function: Intelligent electronic control unit

  • Compatibility: Designed specifically for Drain Module QuickEM

✅ Zero Steam & Air Loss Technology

QuickEM discharges condensate only when necessary, ensuring no live steam or compressed air loss, maximizing energy efficiency.

✅ Fully Automatic & Demand-Controlled Operation

The intelligent control logic adapts to changing operating conditions, providing optimal drainage under all loads.

✅ High Reliability in Harsh Industrial Environments

Designed with industrial-grade materials, QuickEM operates reliably even under high pressure and temperature fluctuations.

✅ Maintenance-Free & Long Service Life

No mechanical wear parts mean minimal maintenance, reduced downtime, and lower total cost of ownership.

✅ Compact & Easy Installation

Space-saving design allows quick installation in new systems or retrofits without major piping modifications.

The QuickEM Control unit is the intelligence behind the system:

  • Real-time condensate detection

  • Adaptive discharge cycles

  • Continuous self-monitoring

  • Automatic fault detection

This ensures consistent drainage performance and long-term operational safety.

Feature Specification
Pressure Class PN 16 / PN 40
Nominal Sizes DN 15, 20, 25, 40, 50
Media Steam, condensate, compressed air
Control Type Electronic, demand-based
Installation Inline / modular

GESTRA Drain Module QuickEM & QuickEM Control are ideal for:

  • Steam distribution systems

  • Heat exchangers

  • Steam tracing lines

  • Compressed air systems

  • Process equipment drainage

  • Power plants

  • Chemical & petrochemical industries

  • Food & beverage production

Feature QuickEM Conventional Drain
Steam Loss Zero High risk
Control Type Intelligent electronic Mechanical
Energy Efficiency Very High Low
Maintenance Minimal Frequent
System Reliability Excellent Inconsistent

✔ Proven German engineering
✔ Trusted worldwide in industrial plants
✔ Supports ISO 50001 energy management
✔ Reduced CO₂ emissions & operating costs
✔ Long-term reliability and performance

Choosing original GESTRA QuickEM means investing in sustainable, efficient, and future-proof condensate management.

Related Products

©2022 PT. TOTALITAS TEKNIK INDONESIA. All Rights Reserved.
MSB-1C, MSB-1.2CGESTRA MSB-1C, MSB-1.2C ecoBolt Continuous Steam Trap MonitorGESTRA DK 47 and DK 57 PN 63 / Class 600 DN 3/8", 1/2", 3/4", 1" Steam TrapsDK 47 and DK 57 PN 63 / Class 600 DN 3/8″, 1/2″, 3/4″, 1&...